398 HYDRAULIC STATION

398_centralina

To be used as an alternative to the hydraulic system of the tractor when it is not appropriate.
Suitable for shearing machine, leaf stripper, lawn mower rotor and tipping machine.

Characteristics

– cooling radiator
– multiplier
– filter
– three points coupling
– 30 l/min. oil flow
– 500 rpm.

TYPE

CI

Accessories on demand

– radiator
– universal joint
– lawn mower rotor
– tipping machine

398_centralina_2

399 SHEARING MACHINE FOR VINEYARD ITEM CMV

399_cimatrice

The shearing machine for vineyard works with an hydraulic sistem allowing movements of the hardened steel knives rotation , obtaining, in this way, at a high speed, a perfect green topping.

It has to be applied to the front of the tractor. Thanks to the 4 movements (horizontal,vertical, oblique and top shifting) it can work on any ground slope and in case of reduced spaces, making versatile the use of the machine.

Characteristics

-hydraulic setting in motion of knives rotation
– hydraulic regulation of the ground slope as regards the row.
– hydrauic regulation of the distance from the row
– hydraulic regulation  in height
– cutting group formed by mono-knife rotor
– knives rotate at high speed

The security of the operator is granted by the protective guard

VERSION

CMV  4 KNIVES WITHOUT TOP
CMV  5 KNIVES WITHOUT TOP
CMV  4 KNIVES AND 1 TOP

Accessories on demand

– application of n. 1 shoots picker
– electrical control for simple CMV
– double knife on the top
– last low knife mechanically reclining with independenent engine
– coupling for tractor

399B SHEARING MACHINE MOD. BI WITH BAR AND DOUBLE BLAME TOP

Characteristic

-hydraulic setting in motion of knives rotation
– hydraulic regulation of the ground slope as regards the row.
– hydrauic regulation of the distance from the row
– hydraulic regulation  in height
– cutting group formed by double-edged blades
– stand for storage

VERSION
CMBI SIMPLE 190CM SIDE BAR
CMBI 150CM SIDE BAR + 70CM TOP
CMBI 190CM SIDE BAR + 70CM TOP

Accessories on demand

– shoots picker
– 1 blade fast knives top
– 2 blades fast knives top
– electrical control
– coupling for tractor

399D MODULAR SHEARING MACHINE ITEM CMV

399d_cimatrice_componibile

 

Modular shearing machine for vineyard with variable width inverted “U”  and two knives top.

Characteristics

– closed at cm. 0 to facilitate road transport
– open at cm. 75 max
– lateral displacement
– vertical displacement
– cutting group regulation
– top regulation from 0 to 90 parallel

Accessories on request

– shoots picker
– 5th knife on the vertical bar

Characteristics

401 SUCTION LEAF STRIPPER WITH ROLERS AND FLANGES

401_defogliatrice

OMA leaf stripper is equipped with a fan which sucks up and attracts leaves towards the two rotating rollers, one of them made up of multiple flanges; by this way it is able to thin out most vegetation without damaging shoots and bunches of grapes , improve the microclimate and allow a better ripening.

OMA leaf stripper can be applied to the front part of the tractor; it can be used in the period after the blossom time (development into a fruit), in order to ease the treatments with the products for the defence of the vine. On the other hand, if is used before the grape harvest, it facilitates the grape- harvesting operations and reduces working time.

TECHNICAL CHARACTERISTICS

Suction blower diam. cm. 60
Required pump capacity 25/30 l. – max 40 l.
Two rollers with working band 55 cm.

VERSION

DF

Accessories on demand

– electrohydraulic controls
– frontal double blade cutter bar
– coupling for tractor

401B REVERSIBLE SUCTION LEAF STRIPPER DF R

401b_defogliatrice_df_r

OMA reversible suction leaf stripper is designed to allow stripping of vegetation without damaging shoots and bunches of grapes.
Equipped with a fan that sucks up and attracts leaves towards the two rotating rollers, offers the best performance without any problem of occlusion caused by the removed leaves.

OMA reversible suction leaf stripper is equipped with a hydraulic device that allows 180°rotation, encouraging the reversibility of the head on the same side of the row and avoiding the useless return of the tractor.

Characteristics

n. 4 hydraulic shifts:
– vertical stroke 70 cm.
– lateral stroke 40 cm.
– right reversibility
– left reversibility

– working band 55 cm.
– Quantity of oil 20 l/min
– rollers height 590 mm

VERSION

DF R

Accessories on demand

– electrohydraulic controls
– frontal double blade cutter bar
– coupling for tractor

402 REVERSIBLE DISC ITEM DR

402_disco_reversibile

Recommended for the tilling in hills vineyards because it doesn’t create sole and avoid rows terracing

Characteristics

Three hydraulic regulations in order to obtain the maximum efficiency:
– distance from the row
– 180° shaft rotation with rotors
– shaft inclination with rotors as to the ground

.

VERSION                                                 WORKING WIDTH

DR  n. 5 discs             1 hydraulic reg.                   1.00
DR  n. 5 discs             2 hydraulic reg.                   1.00
DR  n. 5 discs             3 hydraulic reg.                   1.00
DR 1 n. 6 discs           1 hydraulic reg.                   1.15
DR 1 n. 6 discs           2 hydraulic reg.                   1.15
DR 1 n. 6 discs           3 hydraulic reg.                   1.15

Dr 2 n. 7 discs            1 hydraulic reg.                   1.40
DR 2 n. 7 discs           2 hydraulic reg.                   1.40
DR 2 n. 7 discs           3 hydraulic reg.                   1.40

DR 3 n. 8 discs           1 hydraulic reg.                   1.65/1.70
DR 3 n. 8 discs           2 hydraulic reg.                   1.65/1.70
DR 3 n. 8 discs           3 hydraulic reg.                   1.65/1.70

Acessories on demand

– application of plougher for 2 rows with hydraulic mixer and mechanical locking
– hydraulic locking with regulator for fertilizer spreader

404 WEEDER

404_estirpatore

VERSION          WORKING WIDTH       HP TRACT.       SPRINGS

ES 1 – 3 1/2        1.00                              35                       5
ES 1 – 4 1/2        1.00                              40                       5

ES 2 – 3 1/2        1.20/1.40                      40                       7
ES 2 – 4 1/2        1.20/1.40                      45                       7

ES 3 – 3 1/2        1.40/1.70                      50                       9
ES 3 – 4 1/2        1.40/1.70                      55                       9

ES 4 – 3 1/2        1.70/2.00                      60                     11
ES 4 -4 1/2         1.70/2.00                      65                     11

ES 5 -4 1/2         2.40/2.50                                               13

Accessories on demand

– back cage roller on version ES1 ES2 ES3 (mt. 1.40)
– back cage roller on version ES3 (mt. 1.70) ES 4
– back cage roller on version ES5 (mt. 2.40/2.40)
– back roller hydraulic regulation on version ES1 ES2 ES3 (mt. 1.40)
– back roller hydraulic regulation on version ES3 (mt. 1.70) ES4
– n.2 wheels with bearing on version ES1 ES2 ES3 ES4

405 MILLING MACHINE ITEM ZL SA

405_fresatrice_zl_sa

Light model

Characteristics

– lateral shift on chromed bars through hydraulic piston
– lateral shift with screw 25 cm upon request

VERSION          WORKING WIDTH      HP TRACTOR       WEIGHT

ZL 2 E SA             1.00                             20/35                     160
ZL 3 E SA             1.20                             25/40                     180
ZL 4 E SA             1.40                             30/45                     190

Accessories on demand

– universal joint
– application of 2 wheels with bearing for depth adjustment instead of drop chutes
– 30/40 cm shift

406 MILLING MACHINE (FIXED) ITEM ZL F

406_fresatrice_zl_fe

Fixed milling machine, available in 5 versions according to working width from 1 to 2 m.

Characteristics

– complete with oil in the transmission
– chain drive
– three points coupling
– milling shaft with 4 hoes flanges

.

VERSION          WORKING WIDTH      HP TRACTOR      WEIGHT

ZL 2 F                 1.00                              20/35                   145
ZL 3 F                 1.20                              25/40                   160
ZL 4 F                 1.40                              30/45                   175
ZL 5 F                 1.70                              40/50                   230
ZL 6 F                 2.00                              45/55                   250

Accessories on demand

– two points coupling
– universal joint
– security clutch assembly on universal joint

406_fresatrice_zl_fe_2

407 MILLING MACHINE ITEM ZP / ZPF

407_fresatrice_zp

Characteristics

– Three points coupling
– Provided with gearing transmission module 6K2D
– Milling shaft with with 6 hoes flanges; only 4 hoes can be applied on each flange

VERSION     WORKING WIDTH         HP TRACTOR       WEIGHT

ZP 2 F           1.00/1.10                        35                           280
ZP 2 S           1.00/1.10                        35                           300
ZP 3 F           1.20/1.30                        45                           290
ZP 3 S           1.20/1.30                        45                           310
ZP 4 F           1.40/1.55                        50                           320
ZP 4 S           1.40/1.55                        50                           350
ZP 5 F           1.70/1.80                      50/60                       310
ZP 6 F           2.00                               55/70                       350
ZP 7 F           2.30                               65/75                       400

F = fixed version
S = manually movable through screw version

Accessories on demand

– universal joint
– thousand-stripes universal joint
– security clutch assembly on universal joint
– 4 gears reduction unit
– cage back roll (ZP6 – ZP7)

407_fresatrice_zp_2

408 MILLING MACHINE ITEM ZP-R (FRONT SPIKES)

408_fresatrice_zp_r

Characteristics

– n.3 adjustable height front spikes
– three points coupling
– gearing transmission module 6K2D
– milling shaft with 6 hoes flanges; only 4 hoes can be applied on each flange

VERSION        WORKING WIDTH    HP TRACTOR       N.SPIKES   WEIGHT

ZP 2 R              1.10                           50                          3                340
ZP 3 R              1.20/1.30                   55                          3                360
ZP 4 R              1.40/1.55                   60                          3                400

Accessories on demand

– universal joint
– thousand-stripes universal joint
– security clutch assembly on universal joint
– 4 gears reduction unit
– back cage roller

– carding machine
– thousand-stripes carding machine
– security clutch assembly on carding joint
– 4 gears reduction unit

410 HYDRAULIC MILLING MACHINE ITEM ZP SA

410_fresatrice_zp_sa
The hydraulic shift milling machine, applied to the three points of the tractor through tubes with quick couplings, moves with the distibutor of the tractor on 30 cm on chromed bars equipped with brasses.

Characteristics

– three points coupling
– gearing transmission module 6K2D
– milling shaft with 6 hoes flanges; only 4 hoes can be applied on each flange
– hydraulic shift through piston and hoses with quick couplings on the shunting switch of the tractor

VERSION   WORKING WIDTH   HP TRACTOR      WEIGHT

ZP 2 SA       1.00/1.10                 40                         320
ZP 3 SA       1.20/1.30                 45                         335
ZP 4 SA       1.40/1.55                 55                         350
ZP 5 SA       1.70/1.80                 60                         400
ZP 6 SA       2.05                       70/80                      500
ZP 7 SA       2.30                      90/110                     600

Accessories on demand

– universal joint
– thousand-stripes universal joint
– security clutch assembly on universal joint
– 4 gears reduction unit

417 TIPPING LOADER

417_paletta_ribaltabile

VERSION             WORKING WIDTH

PR 1                       1.00
PR 2                       1.20/1.30
PR 3                       1.50
PR 4                       1.80
PR 5                       2.00
PR 6                       2.20

Accessories on demand

– hydraulic tipping
– 6 teeth fork for dung on version PR 1 – 2
– 7 teeth fork for dung on version PR 3
– 8 teeth fork for dung on version PR 4 – 5
– 9 teeth fork for dung on version PR 6
– liftable bank

419 RIPPER WITH ROLL AND FINS

419_ripper

Characteristics

The rippper is provided with 8 cm. ploughshares. Two lateral fins can be applied to every spike to improve the breaking of grassy turf. Spikes can be provided in fixed or variable position.
The roll, thanks to its particular shape, also performs ground chipping, leaving it levelled.

VERSION      WORKING WIDTH        HP TRACTOR      N. SPIKES H. CM. 50

RP 1              1.10                                45                         3
RP 2              1.20/1.30/1.40               55                         5
RP 3              2.00                                65                         7
RP 4              2.50                                80                         9

ITEM RP A

VERSION      WORKING WIDTH        HP TRACTOR      N. SPIKES H. CM. 65/70

RPA 1              1.10                              55                         3
RPA 2              1.20/1.30/1.40             65                         5
RPA 3              2.00                              75                         7
RPA 4              2.50                              90                         9

Accessories on request

– back roll
– two wheels with bearing
– arrangement for application of two lateral hoes for every spike
– arrangement for more lateral hoes
– lateral ridger rotor application
– hydraulic back roll regulation
– hopper 380 l. with two rows plougher application with mechanical locking and hydraulic mixer
– hydraulic lock gate regulation for fertilizer on hopper

420 SUBSOILER FOR DRAINAGE ITEM RT

420_ripuntatore
VERSION

– RT with 70 cm. spike
– RT with 90 cm. high reinforced spike

Accessories on demand

– Back roll
– Hydraulic regulator of the back roll

423 TIPPING MACHINE

423_spollonatrice

The tipping machine for vineyard works with a universal joint and is equipped with an hydraulic system which regulates the distance from the row and the working height.
It is provided with a desuckering rotor, on which special nylon wires are mounted. They rotate from the upper to the lower part, making a desuckering work on the vine stump and a grass cleaning work in the inter-row.
Applied on the back part of the tractor on the three points coupling, it can work in any kind of vineyard.

The machine can be supplied in three versions: normal, with round flagellum, with flat flagellum.

Characterisitics

– vertical hydraulic regulation
– lateral hydraulic regulation on chromed bars – 25 cm. stroke
– mechanical regulation of the desuckering shaft longitudinal axle
– mechanical regulation of the wires extension control case
– wires extension through a release system

VERSION                   ARM LENGHT

SP 1                                 80  for tractor having max. width 140 cm.
SP 2                                115 for tractor having max. width 180 cm.

Accessories on demand:

– hydraulic regulation  of the wires extension control case
– universal joint

423_spollonatrice_2

424 WIRE UNWINDER SV 3P

424_svolgifilo

This wire unwinder works thanks to a simple brake system, adjustable with a screw; the rotation of the unwinder machine stops at the wire laying end, avoiding its tangling.

Characteristics

– the version SV S can be placed on the ground or on the tow
– the version SV 3 P can be applied to the three points of the tractor, or placed on a planar surface
– more roll holders groups can be apllied to version SV 3 P, allowing simultaneous laying of several wire rolls (till a maximum of three), for a total of four groups.

VERSION

SV S
SV 3 P

Accessories on demand

– roll holder group for version SV 3 P
– peg for roll holder group

428 VINEYARD SHREDDER TR E

428_trinciasarmenti

Light model

Characteristics

– provided with knives
– provided with free wheel inside the reduction gear

VERSION                 WORKING WIDTH           WEIGHT

TR 1 E                          1.00                                  190
TR 1 E  SA                    1.00                                  190
TR 2 E                          1.15                                  200
TE 2 E  SA                     1.15                                  200
TR 3 E                          1.30                                  210
TR 3 E  SA                     1.30                                  210

Accessories on demand

– universal joint

430 MECHANIC DRILL ITEM TV M

430_trivella_meccanica

Characteristics

– three points coupling on any type of tractor (crawler or wheeled)
– spring longitudinal position
– drills not included

VERSION

TV M mechanic drill

Accessories on demand

– mechanical reversing gear
– hydraulic reversing gear with hoses and quick couplings
– hydraulic lateral shift with flow regulator
– drill hydraulic trasversal regulation with flow regulator
– drill hydraulic longitudinal inclination with flow regulator
– cardan shaft protected with security bolt EC attested
– horse complete with rotating wheels
– drill with fixed jambs archimedian screw diam. 100/150
– drill with fixed jambs archimedian screw diam. 200
– drill with fixed jambs archimedian screw diam. 300
– drill with fixed jambs archimedian screw diam. 350
– drill with fixed jambs archimedian screw diam. 400
– drill with hoes for screws recovery box
– compactor for masts diam. 120
– compactor for masts diam. 150

431 LATERAL HYDRAULIC DRILL ITEM TVI

431_trivella_idraulica

The hydraulic drill has a bidirectional rotation with engine modulated on reduction gears.
Equipped with 3 shifts: 1) lateral on rollers  2) in height  3) longitudinal inclination of the drill, all through piston. The control with shunting switch is provided with the tool.

Characteristics

– hydraulic lateral shift on rollers
– hydraulic regulation in height
– hydraulic inclination of the drill
– complete with horse on wheels
– 3 + 1 levers distributor

Accessories on demand

– drill with fixed jambs archimedian screw diam. 100/150
– drill with fixed jambs archimedian screw diam. 200/250
– drill with fixed jambs archimedian screw diam. 300
– drill with fixed jambs archimedian screw diam. 350
– drill with fixed jambs archimedian screw diam. 400
– drill with hoes for screws recovery box
– compactor for masts diam. 120
– compactor for masts diam. 150
– 4 + 1 levers shunting switch with quick couplings for the third hydraulic point
– system controller kit with oil pump and oil

432 AUTOMATIC ROTARY TILLER INTER-VINE ITEM FA

432 AUTOMATIC ROTARY TILLER INTER-VINE ITEM FA
The FS series rotary tillers come in different versions to satisfy every hoeing requirement on rows.
The rotor head is height adjustable in all the models and is  equipped with a spring damper which cushions violent shocks.
The rotor also features a special safety coupling in the transmission.
All models available  with hydraulic height adjustable rotor head.
Characteristics
– supplied with wheels
– equipped with hydraulic oil, universal joint and joint security.
VERSION   WORKING WIDTH   HP TRACTOR      WEIGHT
FA 100                     0,55                               20                     230
FA 130                     0,55                               20                     230
FA 160                     0,55                               25                     270
Accessories on demand
– hydraulic emergency control lever
– electro-hydraulic emergency control
– wheels
The FA series rotary tillers come in different versions to satisfy every hoeing requirement on rows.
The rotor head is height adjustable in all the models and is  equipped with a spring damper which cushions violent shocks.
The rotor also features a special safety coupling in the transmission.
All models available  with hydraulic height adjustable rotor head.

Characteristics

– supplied with wheels

– equipped with hydraulic oil, universal joint and joint security.

VERSION            WORKING WIDTH          HP TRACTOR          WEIGHT
FA 100                   0,55                                 20                              230
FA 130                   0,55                                 20                              230
FA 160                   0,55                                 25                              270

Accessories on demand

– hydraulic emergency control lever
– electro-hydraulic emergency control
– wheels

433 AUTOMATIC CULTIVATOR INTER-VINE ITEM CA

Ideal for tilling vineyards in rows with close plantings.
It applies to the tractor lift with three points coupling.

Characteristics

– supplied with wheels
– equipped with hydraulic oil, universal joint and joint security.

VERSION            WORKING WIDTH          HP TRACTOR          WEIGHT

CA 90                      0,65                                   30                                260
CA 115                    0,65                                   30                                300
CA 140                    0,65                                   30                                320

Accessories on demand

– electro-hydraulic emergency control
– hydraulic emergency control lever
– third-point joint for stony ground

433_coltivatrice_automatica_2

435 WEEDING BAR

435_barra_diserbo

Inter-row hydraulic bar with rotating brush

Characteristics

– metal structure

– safety joint

– hydraulic control movements:

lifting

lateral

tilt

Other sold products

You can also purchase:

  • Duster
  • Post driver
  • Forklift for grapes
  • Band saw
  • Log splitter
  • Vine shoot picker

and more…

399E DOUBLE SHEARING MACHINE ITEM CMVD

399e_cimatrice_doppia

 

Characteristics

– Hydraulic setting of knives rotation
– Cutting group formed by single-knife rotors
– The blades rotate at high speed
– Each side can have 4 or 5 knives
– Each top can have 1 or 2 knives
– Hydraulic side shift
Hydraulic adjustment of inclination in the row
– Hydraulic adjustment of the top
Hydraulic height adjustment
– Easel for remittance
– Minimum Closing cm. 160 of encumbrance

VERSION

CMVD 4 KNIVES FOR EACH SIDE WITHOUT TOP
CMVD 5 KNIVES FOR EACH SIDE WITHOUT TOP
CMVD 4 KNIVES FOR EACH SIDE AND 1 KNIFE ON THE TOP
CMVD 4 KNIVES FOR EACH SIDE AND 2 KNIFE ON THE TOP
CMVD 5 KNIVES FOR EACH SIDE AND 1 KNIFE ON THE TOP
CMVD 5 KNIVES FOR EACH SIDE AND 2 KNIFE ON THE TOP

Accessories on request

– electrical control
– coupling for tractor
– independent last 2 tilting blades
– shoots picker

416 LEVELING BLADE

416_lama_livellatrice

VERSION           WORKING WIDTH

LL  1                    1.50
LL  2                    1.80
LL  3                    2.10/2.20
LL  4                    2.50

Accessories on demand

– n.2 adjustable articulated wheels
– n.2 chutes
– mechanical lateral shift
– hydraulic lateral shift
– leveling roller
– hydraulic inclination (through toothed flange)
hydraulic 360 ° rotation
teflon pads to protect self-locking floors

418 LATERAL PILE-DRIVER FOR TRACKED TRACTORS

Characteristics

– maximum working height 2950 mm

– three movements: vertical, lateral, longitudinal

– hydraulic connection to the tractor

schema

VERSION A mm. B mm. C mm. D mm. E mm. F mm. G mm. Weight Kg.
PP lateral 3150 3050 1700 25-30° 15° 25-30° 30° 240

Accessories on demand

– stand for storage
– hydraulic side shift
– 3 levers diverter
– 4 levers diverter
– pole remover clamp
– plate to be welded to the tractor

Available for wheeled tractor with rear three points coupling.

418_piantapali_con_pinza

420 REAR/SIDE PILE-DRIVER MOD. PPL


The post driver for vineyards/orchards is fitted with a three-prong attachment and can be installed at the back of the tractor.
The PPL post driver has a maximum head lift of approx. 3 metres.
It is a versatile machine, that is easy to use in both new and traditional vineyards.
Perfect for replacing posts with its 3 directional movements even on the most arduous terrain.
Thanks to the weight of the tractor, the post is forced as far down as one metre in depth, even in the most solid terrain.
It can be adapted to any kind of tractor, whether wheeled or caterpillar, and of varying widths.
Fitted with an adjustable attachment, it allows you to use the machine in the ideal working position.
This model is also suitable for tractors with front linkage system.
The central stay rod can be used to block the machine while working.

Characteristics

– maximum working height 3000 mm
– three movements: vertical, side, longitudinal
– hydraulic connection to the tractor

Accessories on demand

– hydraulic side shift
– 3 levers diverter
– 4 levers diverter
– pole remover clamp
– hydraulic third point for longitudinal inclination
– stay rod for fastening

422 FERTILIZER SPREADER ITEM EP

Suitable for the distribution of  mineral and organic fertilizer  (granular).

VERSION    HOPPER CAPACITY               DISTANCE BETWEEN PLOUGHERS

EP 1           250            1 plougher                   –
EP 2           380            1 plougher                   –
EP 3           360            2 ploughers                cm.  70
EP 3           380            2 ploughers                cm.  90
EP 3           430            2 ploughers                cm.  110
EP 3           380            2 ploughers                cm.  90/120 variable distance
EP 3           430            2 ploughers                cm.  110/140 variable distance
EP 3  L        380            2 ploughers               cm.  120
EP 4           500            2 ploughers                cm.  90
EP 4           500            2 ploughers                cm.  90/120 variable distance
EP 4   L       500            2 ploughers               cm.  120
EP 5           400            2 ploughers                cm.  140
EP 5           430            2 ploughers                cm.  140/170 variable distance
EP 6           500            2 ploughers                cm.  150 or 180
EP 6           500            2 ploughers                cm.  150/180 variable distance
EP 7 L         500            2 ploughers                cm.  200
EP 7           500            2 ploughers                cm.  170/200 variable distance

Accessories on demand for fertilizer spreader with 1 plougher versions EP1 – EP2

– universal joint
– front disc
– back roll
– cage back roll
– n.2 lateral spikes
– hydraulic lock gate regulator of fertilizer release
– hydraulic mixer
– inox steel hopper on version EP1
– inox steel hopper on version EP2

422_spandiconcime_2

Accessories on demand for fertilizer spreader with 2 ploughers versions EP3 – EP4 – EP5 – EP6 – EP7

– universal joint
– power take-off hydraulically operated
– n.2 front discs
– full back roll
– cage back roll
– n.2 small back rolls for the spikes
– n.1 central spike
– hydraulic lock gate regulators of fertilizer release
– hydraulic lock gate regulators of fertilizer release separately controlled
– inox steel hopper on version EP3
– inox steel hopper on version EP4

On demand for all models the possibility of application of a tight spike for grassing.

Double Inox steel fertilizer spreader

The double ploughing fertilizer spreader for vineyard with improved material (available also with inox steel hopper to avoid corrosion) and improved performance (rotation of mechanisms achieved through universal joint, or even better through hydraulic system), gives the possibility to adjust fertilizer supply with precision.
The particular shape of the tank allows the uniform distribution of fertilizer even in presence of strong slopes.

426 VINEYARD SHREDDER ITEM TRL

426_trinciasarmenti

Characteristics

– three points coupling
– free wheel inside the reduction gear
– shredding shaft reinforced bearings
– reinforced shredding shaft
– possibility of application (all versions) of both jambs and knives on the shredding shaft
– 3 V-belts damping transmission model B47 on items TR1 – 2 – 3
– 4 V-belts damping transmission model B47 on item TR4
– 4 V-belts damping transmission model B48 on items TR5 – 6 – 7

VERSION               WORKING WIDTH     HP TRACT.    WEIGHT

TR L 1                       1.00                           35                   240
TR L 1 SA                  1.00                           35                    320
TR L 2                       1.15                           40                    250
TR L 2 SA                  1.15                           40                    330
TR L 3                       1.30                           45                    265
TR L 3 SA                  1.30                           45                    340
TR L 4                       1.45                           50                    275
TR L 4 SA                  1.45                           50                    355
TR L 5                       1.60                           55                    300
TR L 5 SA                  1.60                           55                    370
TR L 6                       1.80                           60                    520
TR L 6 SA                  1.80                           60                    550

SA = hydraulic shift
Vineyard shredders TR L and TR L SA are provided without universal joint.

Accessories on demand – version TR – TR L – TR LH

– universal joint TR FE – TR – TRL
– universal joint  TR HL
– rack
– arrangement TR for lawn mower rotor or tipping machine
– arrangement + lawn mower rotor inter-vine
– arrangement + tipping machine
– arrangement + lawn mower rotor inter-vine + tipping machine
– frontal coupling
– reversible coupling
– jointed front wheels for frontal and reversible coupling
– fixed front wheels for frontal and reversible coupling
– sliding rear carter

427 VINEYARD SHREDDER ITEM TR

427_trinciasarmenti

Characteristics of TR version

– three points coupling
– free wheel inside the reduction gear
– 3 V-belts damping transmission model B47 on items TR1 – 2 – 3 – 4
– 4 V-belts damping transmission model B48 on items TR5 – 6 – 7
– shredding shaft with jambs in pressed steel on items TR1 – 2 – 3

VERSION            WORKING WIDTH      HP TRACT.    WEIGHT

TR 1                      1.00                             35                   240
TR 1 SA                 1.00                             35                   320
TR 2                      1.15                             40                   250
TR 2 SA                 1.15                             40                   330
TR 3                      1.30                             45                   265
TR 3 SA                 1.30                             45                   340
TR 4                       1.45                            50                   275
TR 4 SA                  1.45                            50                   355
TR 5                       1.60                            55                   300
TR 5 SA                  1.60                            55                   370
TR 6                       1.80                            60
TR 6 SA                  1.80                            60

SA = hydraulic shift
On versions TR  1 -2 – 3 – 4 – 5 – 6  possibility of central or lateral placement through bush cm. 10
On versions TR 1 SA cm. 25 shift
On versions TR  SA  2 – 3 – 4 – 5 – 6 cm. 30 shift
On demand cm. 40 shift

Accessories on demand – version TR – TR L – TR LH

– universal joint TR FE – TR – TRL
– universal joint  TR HL
– rack
– arrangement TR for lawn mower rotor or tipping machine
– arrangement + lawn mower rotor inter-vine
– arrangement + tipping machine
– arrangement + lawn mower rotor inter-vine + tipping machine
– frontal coupling
– reversible coupling
– jointed front wheels for frontal and reversible coupling
– fixed front wheels for frontal and reversible coupling
– sliding rear carter

429 VINEYARD SHREDDER ITEM TR LH

Super-reinforced type with oversized shredding roll

Characteristics

– hydraulic shift 35 cm.
– three points coupling
– free wheel inside the reduction gear
– reinforced supports and shaft bearings
– reinforced shredding shaft
– possibility of application (all versions) of both jambs and knives on the shredding shaft
– 3 V-belts damping transmission model B47 on items TR3
– 4 V-belts damping transmission model B47 on item TR4
– 4 V-belts damping transmission model B48 on items TR5 – 6 – 7

VERSION          WORKING WIDTH  HP TRACT.   WEIGHT
TRLH 3                1.30                        45                   360
TRLH 3SA            1.30                        45                   390
TRLH 4                1.45                        50                   380
TRLH 4 SA           1.45                        50                   420
TRLH 5                1.60                        55                   410
TRLH 5 SA           1.60                        55                   440
TRLH 6                1.80                        60                   480
TRLH 6 SA           1.80                        60                   500
TRLH 7                2.00                        65                   540
TRLH 7 SA           2.00                        65                   560

Accessories on demand – version TR – TR L – TR LH

– universal joint TR FE – TR – TRL
– universal joint  TR HL
– rack
– arrangement TR for lawn mower rotor or tipping machine
– arrangement + lawn mower rotor inter-vine
– arrangement + tipping machine
– arrangement + lawn mower rotor inter-vine + tipping machine
– frontal coupling
– reversible coupling
– jointed front wheels for frontal and reversible coupling
– fixed front wheels for frontal and reversible coupling
– sliding rear carter

434 BARING/COVERING DISC ITEM DSR

Ideal for tilling vineyards in rows.

Characteristics

– lateral shift
– disc inclination
– 180° disc rotation to perform the baring/covering

Accessories on demand

– additional disc

VERSION

DSR

436 AERATOR RIPPER

436_ripper_arieggiatore

The roll, with its particular shape, also performs the chopping of the ground making it leveled.

Characteristics

– 55 cm. anchors

VERSION          WORKING WIDTH

AR 1              1.20/1.30/1.40/1.50

Accessories on request

– cage roll
– full roll
– hydraulic regulation of the roll
– wheels
– discs

436_ripper_arieggiatore_con_dischi

437 SHEARING MACHINE ELECTRO-HYDRAULIC CONTROLS MOD. CM BI “U” SHAPE

Shearing machine with top and electro-hydraulic controls.

Type

CM BI “U” shape

Accessories on demand

– shoots picker
– 5th knife on the vertical bar
– coupling for tractor
– electro-hydraulic controls

Characteristics

– hydraulic setting in motion of knives rotation
– cut length of double blade bars from 150 cm to cm. 170
– hydraulic regulation of the ground slope as regards the row.
– hydrauic regulation of the distance from the row
– hydraulic regulation  in height
– cutting group formed by double-edged blades
– stand for storage